Posts: 379
Joined: 10/3/2013
Location: Fresno, CA USA
I bought an 04 CR125, and I have a set of 08 CRF250 forks/triple clamps I was going to put on the 125. I know the clamps will bolt and what not, but I wanted to make sure the front wheel/front brake caliper will also go on no problem if I use the original wheel and caliper. I believe it will, but I just wanted to make sure!
Posts: 3227
Joined: 10/1/2006
Location: AZ, USA
Pretty sure you can just slide the CRF250 forks into your 125 clamps. Any reason you want to use the CRF250 clamps?
Powerband in every gear !
Posts: 3532
Joined: 4/3/2013
Location: Benton, LA USA
Posts: 379
Joined: 10/3/2013
Location: Fresno, CA USA
Posts: 379
Joined: 10/3/2013
Location: Fresno, CA USA
Paw Paw 271 wrote:I would check the axle size as it may be different.
Paw Paw
I believe the hubs are the same, I will have to double check! Thanks!
