Posts
696
Joined
6/9/2020
Location
Orange City, IA
US
Working on a 2006 crf250. Had no spark so replaced stator, coil, and plug. Did not pass leak down test so put in new valves and springs. Adjusted valves to spec per the manual. Then passed leak down test. When I kick the bike over I’m getting spark every time but only at the very end of the kick stroke. Is this normal? Will not kick or bump start.
No new piston?
Remove the air filter, hold the carb slide wide open and spray starting fluid in. Try to start the bike and see if it will at least fire a little. If it does you know you have a fuel delivery issue.
The Shop
Post a reply to: Honda CRF250 need help!