Help identifying Neken SFS triple clamps

DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46
Edited Date/Time 9/10/2020 9:30am
I'm trying to figure out if these triple clamps will fit my '19 YZ250f, 22mm offset. I checked all the part numbers on Neken's site but nothing matches up. According to their info, I want:

YZF 250/450 2014-2019 22mm Neken part# 0409026 Parts Unlimited part# 0603-0591

The set I'm trying to determine are from a YZ450f but the part numbers don't match anything, even went through all their different bike applications.

one clamp say:
0401023-22
041 15

The other :
0402016-22
350 14

|
Luxon MX
Profile picture for user Luxon MX
Posts
1081
Joined
11/6/2017
Location
San Diego, CA US
Fantasy
1061st
Luxon MX 9/8/2020 7:47am
9/8/2020 7:47am
If they fit on a modern 450f, then they'll fit on your 19 250f. Both bikes use the same clamps, offset, tube diameter, etc.
DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46 9/8/2020 7:53am
9/8/2020 7:53am
Luxon MX wrote:
If they fit on a modern 450f, then they'll fit on your 19 250f. Both bikes use the same clamps, offset, tube diameter, etc.
Thanks for the feedback @Luxon. The main thing that worries me is the offset, since they offer the 25mm as well for the 250/450. I'm thinking since it's got. The 22 at the end they're 22mm.
Do you have anything out or coming out like these? Your customer service has always been top notch!
1
Luxon MX
Profile picture for user Luxon MX
Posts
1081
Joined
11/6/2017
Location
San Diego, CA US
Fantasy
1061st
Luxon MX 9/8/2020 7:59am
9/8/2020 7:59am
The stock offset in 2017 on the 450 was 25mm, but everything else was 22mm (aside from the 2-strokes). The clamps pictured are 22mm offset based on the part numbers.

We'll have split yamaha clamps coming out relatively soon, but not ones with a SFS style bar mount. We may do that at some point, but I'm just trying to catch up with the regular stuff first!
Rider 5280
Profile picture for user Rider 5280
Posts
2014
Joined
11/9/2011
Location
Denver Metro, CO US
Rider 5280 9/8/2020 9:05am
9/8/2020 9:05am Edited Date/Time 9/8/2020 10:09pm
I run the SFS system on my 2016 YZ250F and am surprised how effective they are. Worth the price of admission, for sure. Using the o-ring installed on the telescoping member to see how much travel you're using for any given SFS pressure setting is very helpful and really highlights the benefit you're receiving.

Note that if you run a steering damper, you may need to limit your bar sweep (I epoxied washers onto my frame to accomplish this easily), otherwise your SFS clamps may interfere/contact the damper tower clamp.

Feel free to contact me if you want to see the setup I ended up with to run a Scotts steering damper. It was a bit of trial-and-error, but I ended up with a clean setup.

The Shop

See All »
DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46 9/9/2020 6:25am
9/9/2020 6:25am
Rider 5280 wrote:
I run the SFS system on my 2016 YZ250F and am surprised how effective they are. Worth the price of admission, for sure. Using the o-ring...
I run the SFS system on my 2016 YZ250F and am surprised how effective they are. Worth the price of admission, for sure. Using the o-ring installed on the telescoping member to see how much travel you're using for any given SFS pressure setting is very helpful and really highlights the benefit you're receiving.

Note that if you run a steering damper, you may need to limit your bar sweep (I epoxied washers onto my frame to accomplish this easily), otherwise your SFS clamps may interfere/contact the damper tower clamp.

Feel free to contact me if you want to see the setup I ended up with to run a Scotts steering damper. It was a bit of trial-and-error, but I ended up with a clean setup.
Thanks man, I'll keep you in mind if I go the steering dampener route. Glad your happy with them, I've heard a lot of good things!
DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46 9/9/2020 6:29am
9/9/2020 6:29am
Luxon MX wrote:
The stock offset in 2017 on the 450 was 25mm, but everything else was 22mm (aside from the 2-strokes). The clamps pictured are 22mm offset based...
The stock offset in 2017 on the 450 was 25mm, but everything else was 22mm (aside from the 2-strokes). The clamps pictured are 22mm offset based on the part numbers.

We'll have split yamaha clamps coming out relatively soon, but not ones with a SFS style bar mount. We may do that at some point, but I'm just trying to catch up with the regular stuff first!
I know your company offers a bar mount for the SFS clamps but, do you have just the upper handlebar holder/bracket? I'd like to replace just those.
Luxon MX
Profile picture for user Luxon MX
Posts
1081
Joined
11/6/2017
Location
San Diego, CA US
Fantasy
1061st
Luxon MX 9/9/2020 10:42am
9/9/2020 10:42am
DirtBikeKid46 wrote:
I know your company offers a bar mount for the SFS clamps but, do you have just the upper handlebar holder/bracket? I'd like to replace just...
I know your company offers a bar mount for the SFS clamps but, do you have just the upper handlebar holder/bracket? I'd like to replace just those.
Our upper bar clamps won't fit the Neken lowers because of the bolt spacing, but I do have two of those Neken upper clamps if you need them. They're brand new too.
DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46 9/9/2020 6:22pm
9/9/2020 6:22pm
Luxon MX wrote:
Our upper bar clamps won't fit the Neken lowers because of the bolt spacing, but I do have two of those Neken upper clamps if you...
Our upper bar clamps won't fit the Neken lowers because of the bolt spacing, but I do have two of those Neken upper clamps if you need them. They're brand new too.
You are awesome! I'd buy them, any chance you can get them shipped out asap? How shall I proceed?
Luxon MX
Profile picture for user Luxon MX
Posts
1081
Joined
11/6/2017
Location
San Diego, CA US
Fantasy
1061st
Luxon MX 9/9/2020 6:56pm
9/9/2020 6:56pm
DirtBikeKid46 wrote:
You are awesome! I'd buy them, any chance you can get them shipped out asap? How shall I proceed?
2 new Neken top clamps with bolts, $40 shipped? Paypal it to billywight@gmail.com and I'll ship them out USPS tomorrow.
1
Luxon MX
Profile picture for user Luxon MX
Posts
1081
Joined
11/6/2017
Location
San Diego, CA US
Fantasy
1061st
Luxon MX 9/9/2020 7:12pm
9/9/2020 7:12pm
DirtBikeKid46 wrote:
Done! Thank you again!
USPS 9405528206335317295739

I'll stick it in the mailbox on my way out of the office tonight. Thanks!
Rider 5280
Profile picture for user Rider 5280
Posts
2014
Joined
11/9/2011
Location
Denver Metro, CO US
Rider 5280 9/9/2020 7:54pm
9/9/2020 7:54pm
^^^ and THIS is why we love Vital. Cool dudes helping each other out.
1
DirtBikeKid46
Profile picture for user DirtBikeKid46
Posts
230
Joined
12/21/2015
Location
Landenberg, PA US
DirtBikeKid46 9/16/2020 10:11am
9/16/2020 10:11am
Any recommendations for bar pads for these clamps? My OEM yamaha one doesn't fit and neither does a Pro Taper. It seems that it's the actual cover that is the issue, not long enough to wrap around and velcro.

Post a reply to: Help identifying Neken SFS triple clamps