Create New Tag
suzukirmz250 suzukirmz250
9/21/2017 7:51 AM

So I've been watching alot of videos on how the team's tear down the race bikes and rebuild then I know to grease axles and and pivoting point but noticed they where putting grease on engine case bolts and the plastic bolts aswell ,is this basicallynthe same affect as putting anti-seize on bolts

| Quote
Acidreamer Acidreamer
9/21/2017 7:52 AM

I think it has to do with them rebuilding the motors so often. I blue loctite every engine bolt. No way would. I grease any of them.

2009 Kawasaki KX450F
2009 Kawasaki KX250F
2002 Suzuki GSXR 600

| Quote
Kawasaki-rider Kawasaki-rider
9/21/2017 7:54 AM

They are mostly using titanium hardware, therefor they need to grease.

| Quote
suzukirmz250 suzukirmz250
9/21/2017 8:02 AM

Okay yea I thought it had to do with the titanium hardware but wasn't sure , so fun when you get a new bike and tear it down and realize that the fa Tory doesn't grease anything lol

| Quote
rmoto003 rmoto003
9/21/2017 9:11 AM

I could be wrong but i think it has to do with how evenly the torque is applied across the length of the bolt. Or how it makes them easier to remove and keeps the internal threads from getting marred up.

| Quote
Paw Paw Paw Paw
9/21/2017 11:19 AM

That is not grease, but rather anti-sieze. Dislike bolt material from tank inserts and engines requires this.

Paw Paw

| Quote
suzukirmz250 suzukirmz250
9/21/2017 11:25 AM

I use anti seize myself but I was watching a video of one of the guys from pro circuit a d he was using grease on all the clutxh cover bolts and alot of other bolts they even asked what he was doing and said he was using high temps grease on the bolts but didn't say for what reason

| Quote
boomsoon7 boomsoon7
9/27/2017 7:50 PM
rmoto003 wrote:

I could be wrong but i ...more

This is correct, it reduces the drag effect on the bolt which gives a more accurate torque spec.

| Quote
Falcon Falcon
9/28/2017 2:51 PM
Kawasaki-rider wrote:

They are mostly using ...more

As PawPaw stated, the titanium bolts don't always play nicely with aluminum frames, steel threads or brass inserts. The anti-seize is to keep the threads from galling together.

Accurate torque readings are maybe a fringe benefit. cool

Braaapin' aint easy.

| Quote
skypig skypig
9/28/2017 3:45 PM

I’ve read previously that torque settings are based on dry threads. Greasing, then torquing, results in tighter bolts.

| Quote
honda65 honda65
10/16/2017 12:03 PM

The last comment is very true, especially concerning some OE top triple clamps. On my Hondas and my current Kawi, if I grease the bolts, the top clamp will continue to compress till the gap is completely closed. Doesn't have this problem with the lower clamp, just the top. I'm a big believer in greasing/antiseazing bolts, but not on these. KTMs clamps don[t seem to be an issue

| Quote
skypig skypig
10/16/2017 5:22 PM

Some bolts on helicopters are torqued by measuring how far the bolt has stretched. EG tighten, measure, tighten, measure, until it is x thou longer. Eliminates thread drag inconsistencies.

Could be the secret the factory teams use on sprocket bolts....l

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry