Graphics Kit Application

Related:
Create New Tag

11/7/2018 7:52 AM

I just put a new graphic kit on my bike 2 days ago and it has rained the past 2 days. The bike is under a shelter, but I am worried about humidity. Will this affect the curing process?

|

11/7/2018 8:18 AM

Im not a graphics guy, but if you put it on when it was 50F at least and its dry, and let it sit overnight at a somewhat warm temp, im sure its fine. If it got wet then no it will probably fall off

|

11/7/2018 8:23 AM

kb228 wrote:

Im not a graphics guy, but if you put it on when it was 50F at least and its dry, and let it sit overnight at a somewhat warm temp, im sure its fine. If it got wet then no it will probably fall off

Okay cool, it didn't get wet and it was around 70F when I put it on. That takes a weight off my shoulders. Thanks

|

11/7/2018 11:25 AM

I would take a hear gun to them to make sure the glue sticks and the heat will evaporate all the water if any under the graphics. If they are quality graphics a little water shouldnt hurt them anyways because they tell you to use soapy water to apply graphics.

|

11/7/2018 3:43 PM

Alec138 wrote:

I would take a hear gun to them to make sure the glue sticks and the heat will evaporate all the water if any under the graphics. If they are quality graphics a little water shouldnt hurt them anyways because they tell you to use soapy water to apply graphics.

I thought about that I'll do so after it stops raining. They're Decal Works graphics so they are quality graphics I would think.

|