Fork tool help YZ125 (please)

752dad
Profile picture for user 752dad
Posts
601
Joined
11/24/2014
Location
Hartland, MI US
752dad
I need to change the fork seals in an ‘05 YZ125.
What tools do I really need?
I can make a cartridge rod holder and seal driver.
Seal bullet or just Saran Wrap?
Thanks in advance,

KC
|
karlz
Profile picture for user karlz
Posts
112
Joined
5/16/2015
Location
GB
karlz 2/6/2019 6:51am
2/6/2019 6:51am
If you are only changing the seals, the only other tool you need is for the fork cap. If you are changing the inner chamber oil you will need the fork cap inner tool, other than that no special tools for the job you are doing.

www.mx-parts.com
Keith72
Profile picture for user Keith72
Posts
390
Joined
7/17/2010
Location
Omaha, NE US
Keith72 2/6/2019 7:43am
2/6/2019 7:43am
Saran wrap or electrical tape works.
752dad
Profile picture for user 752dad
Posts
601
Joined
11/24/2014
Location
Hartland, MI US
752dad 2/6/2019 11:08am
2/6/2019 11:08am
Thanks Guys.

KC

The Shop

See All »
hubbardmx50
Profile picture for user hubbardmx50
Posts
2491
Joined
11/17/2016
Location
Rancho Cucamonga, CA US
hubbardmx50 2/6/2019 11:55am
2/6/2019 11:55am
Someone on here recommending using the bag your parts come in to cover the sharp edges on the fork tube when reinstalling the seals. Did this with the baggy my bushings came in the other day and it worked great. Used Electrical tape too and that worked also.
1

Post a reply to: Fork tool help YZ125 (please)