Posts: 1781
Joined: 7/9/2015
Location: Saint Marys, OH USA
Hey guys I’m in the market for some footpegs for my ‘11 YZ 250. The stock pegs are small and narrow. My buddy has a set of Turner pegs on his yz125 and I felt comfortable with those. I also was looking at Flo MotorSports and Torc1 Racing pegs. Any experience with these? Or what are your favorite pegs
2011 Yamaha YZ 250 -MX
1996 Yamaha Banshee 350 -Trails
1982 Chevy S10
2005 Pontiac GTO -451rwhp
Posts: 207
Joined: 9/7/2017
Location: CAN
I like the titanium raptor pegs I stay away from aluminum because I had a bad experience with one snapping after landing a jump ,but I've also used stock pegs and widen them and that's my current set up now cost me about $20 and after a quick sharpen with a file there as good as my raptor and al0t less money , may not look as cool or be as light but I'm not fast enough for that to matter
Posts: 262
Joined: 8/13/2016
Location: Jacksonville, FL USA
I run titanium Raptor foot pegs on my Husky and love them. Boots stick like glue to them and they are built really well.
Posts: 19440
Joined: 6/15/2010
Location: Bowie, MD USA
Posts: 3022
Joined: 10/1/2006
Location: AZ, USA
The pegs that come on the 4-stroke YZ's and the newer 2-stroke YZ's are wider than the stock ones on the 2011. I have the wider OEM ones on my 2006 YZ's. I like them because they are cheaper than most aftermarket pegs and I don't really prefer how most aftermarket pegs are super sharp and kill boots.
Powerband in every gear !
Posts: 422
Joined: 5/30/2017
Location: Albuquerque, NM USA
I bought a pair of pro pegs for both my huskies. Worth every penny, and my feet stopped slipping off the pegs.
Posts: 23615
Joined: 4/1/2008
Location: USA
eric513anderson wrote:
Hey guys I’m in the market for some footpegs for my ‘11 YZ 250. The stock pegs are small and narrow. My buddy has a set of Turner pegs on his yz125 and I felt comfortable with those. I also was looking at Flo MotorSports and Torc1 Racing pegs. Any experience with these? Or what are your favorite pegs
The 2011 factory pegs are titanium aren't they? If you'd rather sell them vs tossing them on the shelf or in the trash, I'd offer you some gas money for them....
Posts: 3043
Joined: 8/1/2013
Location: Avondale, PA USA
Posts: 9030
Joined: 7/6/2015
Location: Santa Clarita, CA USA
yz133rider wrote:
Get newer yz450f pegs. Amazing upgrade and oem quality.
Do they mount right up?
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
Posts: 925
Joined: 9/7/2012
Location: MA, USA
yz133rider wrote:
Get newer yz450f pegs. Amazing upgrade and oem quality.
mattyhamz2 wrote:
Do they mount right up?
Yes, all Yamaha pegs interchange back to the mid 90s I think.
If you're not mixing gas, you're not haulin ass.
Posts: 3022
Joined: 10/1/2006
Location: AZ, USA
yz133rider wrote:
Get newer yz450f pegs. Amazing upgrade and oem quality.
mattyhamz2 wrote:
Do they mount right up?
Yep.. lots of info on here from when we previously talked this. I have pegs from 2010 YZ250F on both my 2006 YZ125 and YZ250. They are the same height as the originals but much wider and stronger. If you use the 450 pegs they are 5mm lower, depending on what year. I believe Yamaha has gone back and forth on the 450 the last few years. I suspect the newer 2-stroke pegs (2015 + probably?) are the same height as the older 2-stroke pegs.
Powerband in every gear !
Posts: 9030
Joined: 7/6/2015
Location: Santa Clarita, CA USA
yz133rider wrote:
Get newer yz450f pegs. Amazing upgrade and oem quality.
mattyhamz2 wrote:
Do they mount right up?
FGR01 wrote:
Yep.. lots of info on here from when we previously talked this. I have pegs from 2010 YZ250F on both my 2006 YZ125 and YZ250. They are the same height as the originals but much wider and stronger. If you use the 450 pegs they are 5mm lower, depending on what year. I believe Yamaha has gone back and forth on the 450 the last few years. I suspect the newer 2-stroke pegs (2015 + probably?) are the same height as the older 2-stroke pegs.
Thanks guys! I love the pegs on my 14 450 and was hoping I could put a set on a yz250
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
Posts: 3043
Joined: 8/1/2013
Location: Avondale, PA USA
Yes drop right on. I bought brand new take offs with pegs and springs on ebay for $95 just because i love brand new stuff but lightly used are like 50-70 all over ebay. Cant argue with oem quality also
Posts: 925
Joined: 9/7/2012
Location: MA, USA
yz133rider wrote:
Yes drop right on. I bought brand new take offs with pegs and springs on ebay for $95 just because i love brand new stuff but lightly used are like 50-70 all over ebay. Cant argue with oem quality also
Mount them yet? I’d prefer the wider pegs over the titanium ones. Plus they seem to wear faster than the others. I’ve seen plenty of them have hairline cracks and I would NOT want to slice my leg open on one if it gives away.
If you're not mixing gas, you're not haulin ass.
