Posts
2
Joined
5/7/2018
Location
UA
Hi folks.
Have a next problem with my KTM 500 EXC 2018: factory plastic parts are very fragile and very often break after an bike crash. Attempts to solder it did not lead to anything, because the seams also burst, even in a low-speed crash.
On old motorcycles (5-10 years ago), I saw plastic that bent almost 180 degrees, but on my KTM, plastic bending even at 90 degrees is fraught with cracks.
Actually, the question is, where to find such a plastic kit that would be flexible enough and did not break so often?
Have a next problem with my KTM 500 EXC 2018: factory plastic parts are very fragile and very often break after an bike crash. Attempts to solder it did not lead to anything, because the seams also burst, even in a low-speed crash.
On old motorcycles (5-10 years ago), I saw plastic that bent almost 180 degrees, but on my KTM, plastic bending even at 90 degrees is fraught with cracks.
Actually, the question is, where to find such a plastic kit that would be flexible enough and did not break so often?
Post a reply to: Flexible plastic kit for KTM 500 EXC 2018