Exhaust: Hi temp rubber coupling

rucka356
Profile picture for user rucka356
Posts
1043
Joined
4/1/2008
Location
Knoxville, TN US
rucka356
I am restoring an 89 kx80 and when i had a PC muffler put on years ago the welder cut the pipe a little short. I need about 1/2-3/4" in length added back in. Looking for a hi temp rubber coupling that would fit. I've found them online, just not the diameter. Any recommendations?
|
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 8/16/2018 7:34am
8/16/2018 7:34am
Did you look on mcmaster? You just need one thats close. Hose clamps will make up the difference.
rucka356
Profile picture for user rucka356
Posts
1043
Joined
4/1/2008
Location
Knoxville, TN US
rucka356 8/16/2018 8:15am
8/16/2018 8:15am
The hi temperature capability is the real issue, nothing goes above about 112 degrees.
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 8/16/2018 8:19am
8/16/2018 8:19am
Look up general purpose hose and click on 250-799 degrees in the filter. Tons of coolant hose and other high temp stuff.

Post a reply to: Exhaust: Hi temp rubber coupling