Exhaust: Hi temp rubber coupling

Related:
Create New Tag

8/16/2018 7:16 AM

I am restoring an 89 kx80 and when i had a PC muffler put on years ago the welder cut the pipe a little short. I need about 1/2-3/4" in length added back in. Looking for a hi temp rubber coupling that would fit. I've found them online, just not the diameter. Any recommendations?

|

"So you're telling me there's a chance!!"

8/16/2018 7:34 AM

Did you look on mcmaster? You just need one thats close. Hose clamps will make up the difference.

|

8/16/2018 8:15 AM

The hi temperature capability is the real issue, nothing goes above about 112 degrees.

|

"So you're telling me there's a chance!!"

8/16/2018 8:19 AM

Look up general purpose hose and click on 250-799 degrees in the filter. Tons of coolant hose and other high temp stuff.

|

8/16/2018 9:28 AM

thanks, found it

|

"So you're telling me there's a chance!!"