Engine work

Create New Tag

1/22/2018 6:45 AM

I have 1995 yz250 with a long rod kit that I am doing a build thread on. The engine was seized due to what I believe to be a blown head gasket. I know the crankshaft needs rebuilt because the rod is bent, but I am not sure what work the cylinder needs. Any shop recommendations?


1/22/2018 6:58 AM

Millennium technologies is hands down the best cylinder repair shop.


2009 Kawasaki KX450F
2009 Kawasaki KX250F
2002 Suzuki GSXR 600

1/22/2018 7:09 AM

I've had good luck with Powerseal USA.


1/22/2018 9:46 AM

Millenium Tech and Powerseal are your best bet.

They will fix your cylinder, including any welding and plating that needs to be done.


If you're not mixing gas, you're not haulin ass.

1/24/2018 8:35 AM

Can you still buy the long rod parts?


www.MotoHose.com post knee replacement Moto Hose is again open and shipping orders.

Thank you all for your patience during my recovery.

1/24/2018 8:53 AM

From my research the long rod kit came with an 88 yz250 rod and 5mm plate.