Convert auto rekluse to manual

Related:
Create New Tag

6/8/2020 3:02 PM

Hi, I am the owner of a CRF 450 2017 with automatic rekluse clutch, does anyone know if only by removing the wide disc and keeping the pressure plate, the clutch will return to manual, or should I change the pressure plate for the specific one for manual? Thank you.

|

Honda lovers
https://www.facebook.com/javier.navarroalgarra
Instagram: jerbert17
JAVIER05 discount code for https://extremecarbon.eu/

6/8/2020 6:56 PM

I'm not sure if yours is different than my son's KX65, but I removed the wide "auto disk" and replaced it with 3 extra Rekluse metals and 2 stock fibers(I believe that was the amount) and it went back to a full manual clutch. It was explained in my Rekluse manual along with the part #'s for the extra plates.

|

7/15/2020 3:10 AM
Edited Date/Time: 7/15/2020 3:14 AM

No, you have to buy a new Rekluse pressure plate to turn it back into a manual clutch. Then just replace the EXP. disc with the clutch plate that was removed. At least that's what you have to do if you have the Rekluse Core EXP 3.0 setup. If you only have the Rekluse EXP 3.0 then it's just a case of removing the EXP disc, adding back your clutch plates and your standard pressure plate.

|