Posts: 306
Joined: 4/30/2010
Location: Billings, MT USA
New oem springs on the right, old ones on the left. Not sure if the old ones are oem or not... they were the ones on the bike when I purchased it.
I realize the springs can lose strength over time but this sure seems like a big difference...what gives?
Posts: 6009
Joined: 11/16/2011
Location: Menifee, CA USA
I'm no master tech or anything, but I'd say the previous owner put the wrong springs in there. Maybe he wanted heavier springs and went longer instead??
Are you 100% sure your springs are for an RM250 and not an RM-Z250? The correct OEM part numbers for 2005 are as follows:
RM250: 09440-18036
RM-Z250: K9214-50252
Braaapin' aint easy.
Posts: 306
Joined: 4/30/2010
Location: Billings, MT USA
Falcon wrote:
I'm no master tech or anything, but I'd say the previous owner put the wrong springs in there. Maybe he wanted heavier springs and went longer instead??
Are you 100% sure your springs are for an RM250 and not an RM-Z250? The correct OEM part numbers for 2005 are as follows:
RM250: 09440-18036
RM-Z250: K9214-50252
Hmm interesting point... I have 09440-18030
Posts: 1911
Joined: 6/3/2018
Location: Bennett, CO USA
Posts: 3934
Joined: 4/1/2008
Location: USA
