Clutch cover install, tightening sequence?

5280mx
Posts
156
Joined
1/29/2018
Location
Lakewood, CO US
2/22/2018 3:04pm
Hi all...changing out a clutch cover on my 2013 crf450r. Where can I find the proper info for correct sequence to tighten the bolts as well as torque specs? Looked all over the web no luck...when all else fails I can always count on vital. Thanks in advance for any assistance!
|
mxgreg85
Posts
58
Joined
4/1/2008
Location
NY US
2/22/2018 3:48pm
From the manual for my 08: "Install the cover by tightening the six cover bolts in a crisscross pattern in two or three steps to the specified torque: 7 ft lb/10nm/1 kgf/m.
5280mx
Posts
156
Joined
1/29/2018
Location
Lakewood, CO US
2/22/2018 4:16pm
mxgreg85 wrote:
From the manual for my 08: "Install the cover by tightening the six cover bolts in a crisscross pattern in two or three steps to the...
From the manual for my 08: "Install the cover by tightening the six cover bolts in a crisscross pattern in two or three steps to the specified torque: 7 ft lb/10nm/1 kgf/m.
mxgreg85...thanks for the help man! Could not find that info in my manual. Happy riding brother!!!

Post a reply to: Clutch cover install, tightening sequence?

The Latest