Cleaning Oil Funnel

Related:
Create New Tag

3/30/2018 8:41 AM

I'm not the best at covering my funnel after I use it and it always collects dust and little bugs in it. Whats the best way to clean it out before using it again? Run gas through it? oil? rubbing alcohol?

|

3/30/2018 8:47 AM

Contact cleaner

|

2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

80% of the time it works every time
IG @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals

3/30/2018 8:53 AM

Pretty much anything from aerosols like brake/carb/contact cleaner, to simple green followed by water - then I blast compressed air through it.

I love the lid (and the open/closed flow knob) on my Motion Pro funnel; not mention it's graduated with measurements

|

Positively, absolutely 110% obsessed with anything MOTO.

3/30/2018 9:57 AM

I use brake clean then wipe with a blue shop towel. also clean it after I fill the bike and stuff a rag in it.

|

3/30/2018 11:04 AM
Edited Date/Time: 3/30/2018 11:05 AM

After cleaning it , put the funnel in a zip lock bag so it will stay clean for the next use. Most will fit inside a 1 gal ziplock bag.

Paw Paw

|

3/30/2018 11:19 AM

I use contact cleaner.

|

3/30/2018 2:40 PM

Store it upside down with a bolt in the spout.

|

3/30/2018 5:07 PM

fourfourone wrote:

I use brake clean then wipe with a blue shop towel. also clean it after I fill the bike and stuff a rag in it.

Easiest way to break up any old oil or gunk imo. Wipe clean and you’re good.

|

If you're not mixing gas, you're not haulin ass.

3/30/2018 7:42 PM

I use carb cleaner or brake cleaner & a rag. I keep mine in a gallon sized zip lock bag to prevent that.

|