Cleaning 2 stroke head

Related:
Create New Tag

7/27/2018 10:37 PM

So I was using a dremel and a wire wheel to just shine back up some parts on my bike and I was hitting the head and idk why I done it but I flipped it over and hit the inside. I was barely hitting it but I was just cleaning off some of the old carbon/gunk that was on it. My question is, did I just F*** something up? The wire wheel doesn’t cut into the metal but it does make it smoother and so is the head supposed to be texturized or anything? I cleaned the bowl part. PhotoPicture below

|

7/27/2018 11:48 PM

As long as you didn’t touch the gasket surface you’ll be alright... Some guys polish them in effort to slow carbon build up...

|

7/28/2018 5:00 AM

You can use a brass wire wheel on a bench grinder. Works pretty good. Its what i used to do. Vapor blasting is a much better finish and doesnt change the dimensions

|

7/28/2018 6:03 AM

Yeah I’ve seen vapor blasting and it looks really good. I don’t really care all that much I was just messing around and then I did that. Thanks for the replies

|