Can I put a cr250 rear wheel on my cr125?

z71will
Posts
206
Joined
6/4/2017
Location
Pinson, AL US
10/14/2017 1:11pm
I have a 2001 cr125 and it's missing the complete rear wheel. The only wheel that's an exact fit is the 2000-2002 cr125 wheel. However I did notice that the wheel hub of mine is the same one used on the 2000-2001 cr250 as well as the cr125 and that the only difference between the cr125 rear wheel is the rim size. Would a cr250 wheel mount up and run without a problem on a cr125? I'm pretty sure it will but I'm checking with y'all to be sure.
|
karlz
Posts
112
Joined
5/16/2015
Location
GB
10/14/2017 1:26pm
I would say it will fit, but ive never tried it myself. A 125 tyre is 100/90-19 and a 250 is 110/90-19 so that's only 10mm total meaning 5mm each side.

www.karlzracing.com
z71will
Posts
206
Joined
6/4/2017
Location
Pinson, AL US
10/14/2017 1:40pm
karlz wrote:
I would say it will fit, but ive never tried it myself. A 125 tyre is 100/90-19 and a 250 is 110/90-19 so that's only 10mm...
I would say it will fit, but ive never tried it myself. A 125 tyre is 100/90-19 and a 250 is 110/90-19 so that's only 10mm total meaning 5mm each side.

www.karlzracing.com
I think it will work I just looked up and the swingarm is the exact same for both bikes as well so figment shouldn't be an issue.
wsc96
Posts
1010
Joined
8/26/2013
Location
AU
10/14/2017 1:49pm
Standard rim width is 1.85 for 125 and 2.15 for 250. Having said that I sure hope it will work because this is what I’m about to do too Tongue
arvid
Posts
108
Joined
2/23/2014
Location
SE
10/14/2017 1:56pm
yes for sure Silly

The Shop

z71will
Posts
206
Joined
6/4/2017
Location
Pinson, AL US
10/14/2017 2:09pm
Ok then I'll be getting the 250 wheel!
scooter5002
Posts
4761
Joined
6/6/2010
Location
Nanton Alberta CA
10/14/2017 6:36pm
Go to an OEM parts website that still shows part numbers. If the hub numbers are the same for both wheels, than you should be okay, aside from tire width.

Post a reply to: Can I put a cr250 rear wheel on my cr125?

The Latest