CRF 450 2006 water in engine

8/20/2018 2:47pm
Hey guys, washed my bike and now it runs like dick. Cleaned the carb, new gas, air filter. Is there anything I can put in the gas to clean the engine/ carb, like a booster or something. Thanks boys
|
Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
8/20/2018 3:14pm
Not really. Pull and clean the carb.
However, you can remove the float bowl plug and drain what is in there and see if that clears it up.

Paw Paw
dirtmike86
Posts
1180
Joined
10/28/2015
Location
Grand Terrace, CA US
8/20/2018 5:40pm
Not really. Pull and clean the carb. However, you can remove the float bowl plug and drain what is in there and see if that clears...
Not really. Pull and clean the carb.
However, you can remove the float bowl plug and drain what is in there and see if that clears it up.

Paw Paw
Now i know how to make my bike stop running like a dick.
2
lumpy790
Posts
9145
Joined
9/18/2007
Location
York, SC US
8/23/2018 8:50am
IF it is water and dirt pushed up the vent hoses into the float bowl you can Pull the main jet plug then turn the gas on to flush dirt and water out the opening and put the main jet plug back on and restart.
kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
8/23/2018 9:40am
How did it run good before you washed it if there was a big enough hole to let water in? You probably f’ed a wire somewhere.

Post a reply to: CRF 450 2006 water in engine

The Latest