Posts
7
Joined
5/10/2020
Location
DE
Dennis_867
3/4/2021 5:12am
3/4/2021 5:12am
Hey Community!
I have a problem with rebuilding my 05 cr125 Shock. I have already disassembled the spring, bladder and stuff.
But now i have to take the cap off of the body (the one on the bottom side of the shock, where the Rod comes out). In some Vids i saw that the cap is only pressed in and can be removed easily with a hammer.
I´ve tried, but just can´t get it out. Is it possible that its bolted on and has a thread on it?
Thanks for your help.
I have a problem with rebuilding my 05 cr125 Shock. I have already disassembled the spring, bladder and stuff.
But now i have to take the cap off of the body (the one on the bottom side of the shock, where the Rod comes out). In some Vids i saw that the cap is only pressed in and can be removed easily with a hammer.
I´ve tried, but just can´t get it out. Is it possible that its bolted on and has a thread on it?
Thanks for your help.
It probably just has a bit of dirt in the seat holding it in
Post a reply to: CR125 Shock Rebuild Problem