CR125 Foot Peg Compatibility

TheRookie
Profile picture for user TheRookie
Posts
211
Joined
9/26/2017
Location
Annapolis, MD US
TheRookie
Good Morning everyone, I am currently working on building up my 2000 CR125 right now and I am looking to replace the pegs. Seems like there are not many options out there other than IMS Pegs for the 2000-01 models. Does anyone know if pegs for newer models will fit? I have done some internet searching before posting here and some people say they wont and some people say they will so the information is conflicting.

Thanks in advance.
|
JOE_SPROCKETS#1 8/17/2021 6:14am
8/17/2021 6:14am
i put newer yz fastway ext pegs on my 96 cr 125 and it was a direct bolt up. But not sure about the 2000 model. I'm sure you can do some digging and find out what newer bikes that use the same style.
R66
Profile picture for user R66
Posts
278
Joined
4/16/2021
Location
Atlanta, GA US
R66 8/17/2021 12:49pm
8/17/2021 12:49pm
I put 2014 crf450 pegs on my ‘04 CR250R.
Fit perfectly with no modification. I think they will fit your bike too. Get new oem pins, springs, washers, and cotter pins while you are at it.
1
TheRookie
Profile picture for user TheRookie
Posts
211
Joined
9/26/2017
Location
Annapolis, MD US
TheRookie 8/18/2021 5:21am
8/18/2021 5:21am
R66 wrote:
I put 2014 crf450 pegs on my ‘04 CR250R. Fit perfectly with no modification. I think they will fit your bike too. Get new oem pins...
I put 2014 crf450 pegs on my ‘04 CR250R.
Fit perfectly with no modification. I think they will fit your bike too. Get new oem pins, springs, washers, and cotter pins while you are at it.
The 02-07 CRs seem to share the same part numbers as most of the newer bikes. Seems like the dang 00-01 is the odd one...
1
wydopen
Profile picture for user wydopen
Posts
1291
Joined
8/17/2011
Location
805, CA US
wydopen 8/19/2021 11:52am
8/19/2021 11:52am
Is there a tab on the frame the peg goes over instead of a bracket the pegs go inbetween? If so I’m having the same problem with my 01 RM250. Can only get IMS and they suck. Have them sharpened as much as possible but still too slippery. Going to get a set of those stainless raptor style pegs someone has for sale in the bazar and have my friend modify them.

Post a reply to: CR125 Foot Peg Compatibility