CR kickstarter won't come off the shaft?

macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
7/15/2017 2:53pm Edited Date/Time 7/15/2017 4:01pm
Trying to do the water pump seals on my 07 CR125 and to do so, I need to take the whole right side cover off. Thing is, I can't even get the kickstarter off! I mean it won't budge at all. In ones I've done in the past I'm usually able to wiggle it by hand and maybe tap on it with a hammer and it comes right off. Not so much with this one. Ive tried everything I can think of. Anyone know if I can just leave it on there and pull the kickstarter gear off along with the cover all together? Never done this before.
|
macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
7/15/2017 2:54pm


wwoberg
Posts
740
Joined
11/19/2010
Location
Soddy Daisy, TN US
7/15/2017 3:24pm
PB Blaster or WD or any type of penetrant. Let it soak in.
imoto34
Posts
3781
Joined
1/28/2010
Location
TN US
Fantasy
3151st
7/15/2017 3:51pm
There must a bur on that spindle.
macz400
Posts
1391
Joined
8/20/2013
Location
League City, TX US
7/15/2017 3:59pm Edited Date/Time 7/15/2017 4:01pm
wwoberg wrote:
PB Blaster or WD or any type of penetrant. Let it soak in.
Soaked it with PB blaster and put some MAP gas heat on it. Still nothing.

The Shop

Post a reply to: CR kickstarter won't come off the shaft?

The Latest