Anyone with a 2019 or 2018.5 fe KTM please help

Related:
Create New Tag

8/15/2018 1:12 PM

Can anyone with a 2019 ktm please check their fuel pump wiring to see if it is like my SXF 250. I just wanted to check if they normally come like this.the bike hasn't even been started yet but the ktm dealer wasn't much use. Straight out of the connector it has a sharp 90 degree bend then it has another 180 degree bend and it just doesn't look right to me. Thanks in advance.Photo
S

|

8/15/2018 1:20 PM

I have a 2019 250 sxf and my wire is straight. I´m sure that it´s not a big problem, just re route it until it´s straight and check the wire after a few hours of use.

|

8/15/2018 1:34 PM

Huskyman wrote:

I have a 2019 250 sxf and my wire is straight. Im sure that its not a big problem, just re route it until its straight and ...more

Could you post a picture for me please? I have straightened it but just didn't want it to break in 6 months and have to buy a new harness, I want a few photos so that I can send it to ktm so they have it on record.

|

8/15/2018 4:36 PM

Just pull it straight, not a big deal. It's got the heat shrink wrap on at the connection for the reason to not break off.

|

8/15/2018 4:53 PM

Re route the wire bro... wtf lol

|

8/15/2018 9:57 PM

As I stated above I have straightened the wire, I just wanted to see if it was normal...See if other were the same!!

|