'86 CR125 - disassemble forks

Glen
Profile picture for user Glen
Posts
261
Joined
11/26/2010
Location
Rockaway, NJ US
Glen
Hi all, could use some help taking apart forks from an '86 CR125. Can't get the bottom bolt out. I normally use a threaded rod with some nuts at the end to hold the damper, but don't have any nuts big enough (lol) and can't tell what size it is. Any ideas? Looks like maybe a 27-30mm. Thanks!
|
riv187
Profile picture for user riv187
Posts
527
Joined
2/1/2015
Location
Lakeland, FL US
riv187 9/24/2019 9:45pm
9/24/2019 9:45pm
Put fork back together with spring and spacer inside. Then turn upside down,,with axle in clamp,,push down and same time zap the bolt/allen in bottom with air or electric impact. Care to protect the schrader isn't shoved into ground.. A chunk of 2x4 with hole works.
1
Glen
Profile picture for user Glen
Posts
261
Joined
11/26/2010
Location
Rockaway, NJ US
Glen 9/25/2019 6:15pm
9/25/2019 6:15pm
I'll give that a try, thanks!

Post a reply to: '86 CR125 - disassemble forks