52mm Cove valve base settings

Related:
Create New Tag

9/9/2017 3:37 AM

Does anyone have or know any good base settings for the 52mm Cone vale ? i am a 82kg rider with gear on
looking for mostly sand base setting as here in Western Australia there is mostly sand tracks. any help or advice much appreciated

|

9/9/2017 4:03 AM

That's hard to say because however they are set up internally with Springs and valving willl determine how stiff they are. Unless 2 sets of forks are exactly the same, someone else's settings won't mean anything to yours...

|

9/9/2017 4:46 AM

CarlinoJoeVideo wrote:

That's hard to say because however they are set up internally with Springs and valving willl determine how stiff they are. Unless 2 sets of forks are exactly the same, someone else's settings won't mean anything to yours...

get what your saying just looking for some idea of a base setting i can go from there.
thanks

|

9/9/2017 11:26 AM

I'd count how many clicks for rebound and compression when they are all the way soft, then start in the middle.

I start mine at around 12 out from full hard.

|