Posts: 106
Joined: 11/30/2013
Location: Ocala, FL USA
Does anyone remember the counter balancer nut that would back off on the 17 250 and 350? I believe there was a service advisory put out that mxa talked about.
I recently picked up an 18 350sxf and can't find any info about it.
Do you know if the issue was addressed for the model year 18?
Posts: 9106
Joined: 7/6/2015
Location: Santa Clarita, CA USA
https://motocrossactionmag.com/motocross-scuttlebutt/
Article is here. A local shop, N2Dirt, was the first one to find it.
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
Posts: 106
Joined: 11/30/2013
Location: Ocala, FL USA
mattyhamz2 wrote:
https://motocrossactionmag.com/motocross-scuttlebutt/
Article is here. A local shop, N2Dirt, was the first one to find it.
Thanks for the article!
Is there any information about whether or not it was addressed for the 18s?
Posts: 9106
Joined: 7/6/2015
Location: Santa Clarita, CA USA
mattyhamz2 wrote:
https://motocrossactionmag.com/motocross-scuttlebutt/
Article is here. A local shop, N2Dirt, was the first one to find it.jvail134 wrote:
Thanks for the article!
Is there any information about whether or not it was addressed for the 18s?
As far as I know, it was just the 17's. Call up N2Dirt, 661-252-0269. Ask for Brian.
2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F
80% of the time it works every time
IG @hammerfamily_4 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals
