2020 Suzuki RMZ250 Bar Bend?

biondo
Profile picture for user biondo
Posts
278
Joined
3/12/2020
Location
Escondido, CA US
biondo
Edited Date/Time 1/18/2021 8:46am
Hi anyone know what is the stock bend
RMZ250 comes stock ? I
Thanks all
|
GaryC1
Profile picture for user GaryC1
Posts
267
Joined
3/13/2017
Location
Belfast GB
GaryC1 1/18/2021 3:18am
1/18/2021 3:18am
According to Renthal site they are an 821 McGrath Fatbar. Dimensions are below as per their website 👍


1
seth505
Profile picture for user seth505
Posts
9369
Joined
4/1/2008
Location
SD, CA US
Fantasy
1092nd
seth505 1/18/2021 7:11am
1/18/2021 7:11am
Yup, above is correct. This is a 2021.

1
davidgrip
Profile picture for user davidgrip
Posts
273
Joined
10/7/2011
Location
Indianapolis, IN US
davidgrip 1/18/2021 8:00am
1/18/2021 8:00am
seth505 wrote:
Yup, above is correct. This is a 2021. [img]https://p.vitalmx.com/photos/forums/2021/01/18/473464/s1200_111A1406_016A_447F_8F5B_D49A9C314421.jpg[/img]
Yup, above is correct. This is a 2021.

WOW! Thanks for the picture! Not to hijack. I always run the same bar on every bike, with a cross bar. The bar is rotated forward till the cross bar hits the t-handle on the forward bolt. This was to be the neutral position. I only used the marks to center the bars. Looking at your picture 0 would be rolled back. Personal preference. I thought about Fat bars, but will need to adjust accordingly. Even with the same bend this would be a HUGE difference. Always learning. Thanks!
1
biondo
Profile picture for user biondo
Posts
278
Joined
3/12/2020
Location
Escondido, CA US
biondo 1/18/2021 8:13am
1/18/2021 8:13am
Hi guys thanks for the information!
Thinking I want to have same bend on my
New RM250 but it came with adapters for 11/8 but it raises bars ...don’t know if they have same bend in 7/8” ..,
Thanks again!

The Shop

See All »
davidgrip
Profile picture for user davidgrip
Posts
273
Joined
10/7/2011
Location
Indianapolis, IN US
davidgrip 1/18/2021 8:28am
1/18/2021 8:28am
biondo wrote:
Hi guys thanks for the information! Thinking I want to have same bend on my New RM250 but it came with adapters for 11/8 but it...
Hi guys thanks for the information!
Thinking I want to have same bend on my
New RM250 but it came with adapters for 11/8 but it raises bars ...don’t know if they have same bend in 7/8” ..,
Thanks again!

Yes. I only use 7/8". I can only use this for the control length. I run my levers mounted in. Not just in from the end of the bars. Never an issue.
seth505
Profile picture for user seth505
Posts
9369
Joined
4/1/2008
Location
SD, CA US
Fantasy
1092nd
seth505 1/18/2021 8:46am
1/18/2021 8:46am
seth505 wrote:
Yup, above is correct. This is a 2021. [img]https://p.vitalmx.com/photos/forums/2021/01/18/473464/s1200_111A1406_016A_447F_8F5B_D49A9C314421.jpg[/img]
Yup, above is correct. This is a 2021.

davidgrip wrote:
WOW! Thanks for the picture! Not to hijack. I always run the same bar on every bike, with a cross bar. The bar is rotated forward...
WOW! Thanks for the picture! Not to hijack. I always run the same bar on every bike, with a cross bar. The bar is rotated forward till the cross bar hits the t-handle on the forward bolt. This was to be the neutral position. I only used the marks to center the bars. Looking at your picture 0 would be rolled back. Personal preference. I thought about Fat bars, but will need to adjust accordingly. Even with the same bend this would be a HUGE difference. Always learning. Thanks!
Same here, I like to have same/similar bars on all bikes. I like low & rolled back bars so mine are probably a little extreme. Kinda like jeremy martin style haha
1

Post a reply to: 2020 Suzuki RMZ250 Bar Bend?