2020 FC450 Knocks into gear when rolling the wheel

Bennett59
Profile picture for user Bennett59
Posts
862
Joined
9/3/2015
Location
Bakersfield, CA US
Bennett59
I have a Fc450 2020 Rockstar model and all of sudden if you roll the wheel backward or roll it super hard it clicks into gear on the stand, for example if your putting chain lube on the chain it will jump Into gear 27 hours on it.
|
willbilly
Profile picture for user willbilly
Posts
340
Joined
6/28/2016
Location
Corpus Christi, TX US
willbilly 5/17/2021 7:12pm
5/17/2021 7:12pm Edited Date/Time 5/17/2021 7:15pm
Pull the clutch cover and check that the star gear and detent pulley bolts are tight. You will need to align the water pump/counterbalancer gear on reassembly. Check the service manual for procedure. Use a nail in the hole to hold it in place.
Factor E
Profile picture for user Factor E
Posts
734
Joined
9/22/2011
Location
So Cal, CA US
Factor E 5/17/2021 9:40pm
5/17/2021 9:40pm
This is a common problem with the Austrian bikes
the neutral position on the star gear is the problem
Have fixed a few

Post a reply to: 2020 FC450 Knocks into gear when rolling the wheel