2019 RMZ250 extended shift lever

pdub187
Posts
742
Joined
1/28/2013
Location
AU
Fantasy
2499th
6/27/2020 6:01pm
I'm having trouble finding an extended shift lever for my RMZ. I have a size 14 and have always run the hammerhead +20. I see that they only offer a lever for the 450. Will this fit the 250 or does anyone know of any other options? Thankyou.
|
wwdiii
Posts
1561
Joined
4/15/2019
Location
League City, TX US
6/27/2020 6:44pm
I have Tusk shift lever on my YZ250F and its too short for my size 11 feet. Ordered an extended Hammer head 10 pluss and a Hamerhead lever. The lever never came in but the Tip from Amazon I ordered did.

I thought I would give it a try and see if I could make it work. I used the spring from the Tusk shift lever. I had to bend the end of the spring but it works fine. I would guess you could get a tusk from Rocky Mountain for your RMZ and use the Hammerhead plus tip. I bet the ends of the Tusk Shift Levers are all the same. Worst case you send it back.
6/28/2020 8:46am
same problem, just got a 20 rmz250 and for my life cannot find an extended lever for the 19+ gen. I need .8in extra to make it ideal.

Post a reply to: 2019 RMZ250 extended shift lever

The Latest