Posts
125
Joined
3/23/2013
Location
GB
Had a large crash which bent front brake lever and made the brake really spongey.
Assumed it would be master cylinder seals so changed them, no better.
Then noticed the calliper pistons weren’t pushing evenly, meaning the pads aren’t pushing square to the disc which is causing the spongey feel. The top piston causes the top half of the pad to push the disc instead of clamping it.
Changed the calliper seals also.
Any ideas?
Thanks
Assumed it would be master cylinder seals so changed them, no better.
Then noticed the calliper pistons weren’t pushing evenly, meaning the pads aren’t pushing square to the disc which is causing the spongey feel. The top piston causes the top half of the pad to push the disc instead of clamping it.
Changed the calliper seals also.
Any ideas?
Thanks
Post a reply to: 2018 YZ250F Front brake problem