2017 yz250f rectifier/regulator question

blazeco303
Profile picture for user blazeco303
Posts
3
Joined
7/2/2018
Location
Littleton, CO US
blazeco303
Just bought my first bike in a long time and was inspecting it and noticed the rectifier/regulator is loose where it connects to the frame. Checked manual and it says 5.2 ft/lbs of torque, my current torque wrench only goes down to 10 ft/lbs. My questions is, is this normal for it to be loose or should it be snug to the frame with the proper torque specs? Thanks
|
Naanak
Profile picture for user Naanak
Posts
625
Joined
9/9/2014
Location
NJ US
Naanak 7/2/2018 12:33pm
7/2/2018 12:33pm
Is that the black thing with “fins “ and two bolts into the frame on the left side?
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 7/2/2018 12:43pm
7/2/2018 12:43pm
Just snug it down. Whatever you can do with one hand with a ratchet while holding it at the socket instead of the end of the handle.
blazeco303
Profile picture for user blazeco303
Posts
3
Joined
7/2/2018
Location
Littleton, CO US
blazeco303 7/2/2018 1:33pm
7/2/2018 1:33pm
Yes, accessible by removing upper shroud and air box cover @Naanac.
Naanak
Profile picture for user Naanak
Posts
625
Joined
9/9/2014
Location
NJ US
Naanak 7/2/2018 5:05pm
7/2/2018 5:05pm
Yeah on mine 16 Yz250f. If you grab it it has some wiggle but the bolts are tight.

Post a reply to: 2017 yz250f rectifier/regulator question