2017 yz250f rectifier/regulator question

Related:
Create New Tag

7/2/2018 11:52 AM

Just bought my first bike in a long time and was inspecting it and noticed the rectifier/regulator is loose where it connects to the frame. Checked manual and it says 5.2 ft/lbs of torque, my current torque wrench only goes down to 10 ft/lbs. My questions is, is this normal for it to be loose or should it be snug to the frame with the proper torque specs? Thanks

|

7/2/2018 12:33 PM

Is that the black thing with “fins “ and two bolts into the frame on the left side?

|

7/2/2018 12:43 PM

Just snug it down. Whatever you can do with one hand with a ratchet while holding it at the socket instead of the end of the handle.

|

7/2/2018 1:33 PM

Yes, accessible by removing upper shroud and air box cover @Naanac.

|

7/2/2018 5:05 PM

Yeah on mine 16 Yz250f. If you grab it it has some wiggle but the bolts are tight.

|