Related:
Create New Tag
Evan_Denysiuk1 Evan_Denysiuk1
7/9/2018 7:03 PM

Okay so I recently picked up a 17 150 SX. It’s for my stepson. He has been complaining of it cutting in and out if it’s not wide open. I’ve only ridden it in the sand and noticed in 2nd it ran like crap until it cleaned out then all good. I thought it was maybe just super rich everywhere. I put in the JD kit while at the track today and it seems to run cleaner everywhere except mid revs mid throttle just before the power comes on. It’s like a rev limiter and the bike surges. Super annoying coming out of tight corners where I have to get off the pipe. Any ideas? Going to be pulling the top end apart in the next couple days just for a routine inspection and piston change. Anything I should be looking for in the PV?

| Quote
CarlinoJoeVideo CarlinoJoeVideo
7/9/2018 9:30 PM

Check the power valve is moving smooth. Seems to be a few posts lately about that problem.

| Quote
Paw Paw 271 Paw Paw 271
7/10/2018 3:19 AM
CarlinoJoeVideo wrote:

Check the power valve is ...more

X2

Paw Paw

| Quote
riv187 riv187
7/10/2018 3:42 PM

If th power valve arms are working smoothly...get a 5.5 or 5.75 slide. My 18 TC125 would stumble mid range on acceleration,,,it was a rich condition. I cut slide from 4 to 5.5 and whole new bike...smooth rpm building from bottom to top.

| Quote
Evan_Denysiuk1 Evan_Denysiuk1
7/11/2018 9:51 PM

The PV seems to be sticking 2-3 out of every 20 times I open and close it. I’ve been reading about the F1 Moto arms and I’ll give them a try. If they don’t work I’ll look into modifying the slide. Thanks for the replies guys.

| Quote
jt.hagerty jt.hagerty
7/12/2018 4:51 AM

I had the F1 moto power valve arms on my 2016 TC125 and made a big difference. The power valve worked a lot smoother.

| Quote
Evan_Denysiuk1 Evan_Denysiuk1
8/11/2018 4:17 PM

Update: F1 Moto PV Arms are the real deal. Wayyy better took it out the other day and no more surging. Ran clean everywhere. So if anyone else is having this issue I’d suggest them and shipping from Aus was faster than I thought it was going to be.

| Quote
2stmark 2stmark
8/11/2018 7:58 PM
Evan_Denysiuk1 wrote:

Update: F1 Moto PV Arms ...more

I wondered if it changed the delivery ? my 16' hits a bit hard for tight woods . tried the pv colored springs already

| Quote
CarlinoJoeVideo CarlinoJoeVideo
8/12/2018 10:01 AM
Evan_Denysiuk1 wrote:

Update: F1 Moto PV Arms ...more

2stmark wrote:

I wondered if it changed ...more

Did you try adjusting the tension on the square bolt on the right case? The more you unscrew it, the less hit and more bottom end it has. I like 1.5-1.75 turns in from all the way out

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry