Just planning my new project, I've got a 2014 KTM250SX with no front end. I've found a set of 2016 4cs forks off a 300exc and some 2016 neken sfs triples off a 450sxf.
My question is, as I'm putting a complete 2016 front end on, the geometry should remain the same as a 2014 front end?
But if I was to combine say, 2016 forks with 2014 triples then my geometry would be different as the 2016 forks lugs have the axle centre closer to the fork centre?
|
Quote