Posts
1923
Joined
12/14/2010
Location
ORANGEVALE, CA
US
Fantasy
2511th
Phillip_Lamb
4/12/2018 12:11pm
4/12/2018 12:11pm
Hey so i have been having a lingering issue with my 2013 rmz250.
upon start up, it runs rough to where i cant touch the throttle without it dying. after it settles it runs ok but is a little poppy.
I had the grey(rich) coupler installed and changed to the white(lean) with no difference noticed. I also had a power commander fuel mapping that i pulled that made no change.
Also I have the hot start cable unmounted from the bars and coiled up along the frame but the cable is loose, not being pulled on.
Could this be a sensor or injector?
upon start up, it runs rough to where i cant touch the throttle without it dying. after it settles it runs ok but is a little poppy.
I had the grey(rich) coupler installed and changed to the white(lean) with no difference noticed. I also had a power commander fuel mapping that i pulled that made no change.
Also I have the hot start cable unmounted from the bars and coiled up along the frame but the cable is loose, not being pulled on.
Could this be a sensor or injector?
TPS setting incorrect......
Paw Paw
Post a reply to: 2013 rmz250 runs rough