Posts: 387
Joined: 4/7/2010
Location: Newark, OH USA
I’m selling my 2013 crf450 and my aftermarket wheels seperate. A friend has a 18 crf450 and is interested. Tusks part numbers are different but I was almost positive I read somewhere they’d fit. Anyone out there tried them or know for sure if they do/don’t fit?
Posts: 505
Joined: 8/6/2015
Location: Auburn, CA USA
I would take the wheels over to your buddy's house, and try putting them on to know for sure.
Then once there on, we as moto guy's are quick to buy something that looks bitchen
Posts: 14
Joined: 4/10/2017
Location: CAN
Wheels should be identical, I bought a set of 2012 wheels for my 17 crf450 the front was good but the rear I needed a 1/8" spacer in between the hub and sprocket as the 12 was narrower and binded the chain up , pretty sure in 2013 they changed that and made it the hub the 1/8" thicker at the hub where the sprocket bolts up.
Posts: 290
Joined: 9/12/2017
Location: Murrieta, CA USA
Exact same. Only way it wouldn't work is if your bike was the 250R, which changed the following year in 2014.
@fiendz.cc
Posts: 768
Joined: 7/21/2016
Location: Houston-ish, TX USA
They sell aluminum spacers on ebay for $20. Or you can buy an offset sprocket from a few companies.
Posts: 1183
Joined: 8/20/2013
Location: League City, TX USA
yamahaha131 wrote:
I’m selling my 2013 crf450 and my aftermarket wheels seperate. A friend has a 18 crf450 and is interested. Tusks part numbers are different but I was almost positive I read somewhere they’d fit. Anyone out there tried them or know for sure if they do/don’t fit?
13 CRF450 through 18 CRF450 wheels and spacers are exactly the same.
