Posts
6313
Joined
12/12/2007
Location
Huntington Beach, CA
US
2011 KTM 250MXC with a 300cc cylinder kit
Worked on a lot of bikes .... especially 2 strokes but never seen something like this. Seems the fuel is flooding into the combustion chamber and not allowing the bike to start.
Havent tore into the bike yet just wanted to see if anyone had a similar problem so i know what things to look for.
Its my cousins bike he says it runs fine once he gets it started but its hard to get started. Strictly fuel (premix) coming out of the exhaust side of the cylinder. I know the first place im checking is the float but any other possible causes?
Worked on a lot of bikes .... especially 2 strokes but never seen something like this. Seems the fuel is flooding into the combustion chamber and not allowing the bike to start.
Havent tore into the bike yet just wanted to see if anyone had a similar problem so i know what things to look for.
Its my cousins bike he says it runs fine once he gets it started but its hard to get started. Strictly fuel (premix) coming out of the exhaust side of the cylinder. I know the first place im checking is the float but any other possible causes?
Post a reply to: 2011 KTM 250 MXC Spitting Lots of Fuel Out Exhaust Pipe