Posts: 22
Joined: 12/4/2017
Location: Pass Christian, MS USA
Edited Date/Time:
Im in the process of trying to hunt down some Ti bolts/hardware. Company im wanting to go through shows all the 2011 stuff. just curious if all that hardware would fit the 17 model. I know its overkill for an already light yz but im just building this bike to have fun and let somebody race it for me. thanks in advance
Posts: 1731
Joined: 8/25/2015
Location: Mansfield, OH USA
Should work. I think the only difference is the body. So maybe those few bolts wont.
2009 Kawasaki KX450F
2009 Kawasaki KX250F
2002 Suzuki GSXR 600
Posts: 22
Joined: 12/4/2017
Location: Pass Christian, MS USA
Acidreamer wrote:Should work. I think the only difference is the body. So maybe those few bolts wont.
I was thinking the front plastics would interchange. Im thinking the tank is the same. Was a little worried about the rear shrouds/fender/airbox. But the frame bolts should all be the same?
Posts: 1941
Joined: 7/9/2015
Location: Saint Marys, OH USA
Racetech titanium is a company I believe
2011 Yamaha YZ 250 -MX
1996 Yamaha Banshee 350 -Trails
1982 Chevy S10
2005 Pontiac GTO -451rwhp
Posts: 22
Joined: 12/4/2017
Location: Pass Christian, MS USA
eric513anderson wrote:Racetech titanium is a company I believe
that's who I plan on using for all the bolts. Going to use mettec for the axles and swingarm pivots if the part numbers go for a 2017 also.
Posts: 138
Joined: 5/22/2017
Location: Houston, TX USA
Posts: 22
Joined: 12/4/2017
Location: Pass Christian, MS USA
You are right. So far the major bolts have been the same. Only 2 if ran into a problem with is the lower bolts on the number plates and the front fender bolts
