Posts
8
Joined
4/17/2021
Location
HR
Hello guys,
I spotted some leakage from countershaft seal.
I removed the front sprocket and removed the seal (regular rubber/teflon seal).
I spotted that the collar have some grooves so i would like replace also the collar, but i saw that i dont have any oring inside, that from the beggining was strange to me because the front sprocket had few mm right/left movement, was not tight on the shaft.
So now i have two options for kits to buy.
I can buy metal seal with 4 orings or regular seal with 2 orings?
Which one to buy?
The orings i just put them on the shaft after the bearing or they have a groove where to sit?
Sorry for my english, regards!
I spotted some leakage from countershaft seal.
I removed the front sprocket and removed the seal (regular rubber/teflon seal).
I spotted that the collar have some grooves so i would like replace also the collar, but i saw that i dont have any oring inside, that from the beggining was strange to me because the front sprocket had few mm right/left movement, was not tight on the shaft.
So now i have two options for kits to buy.
I can buy metal seal with 4 orings or regular seal with 2 orings?
Which one to buy?
The orings i just put them on the shaft after the bearing or they have a groove where to sit?
Sorry for my english, regards!
Looks like 2 orings
Post a reply to: 2009 kx 85 countershaft seal