Posts
6
Joined
7/10/2022
Location
Boston, MA
US
Edited Date/Time
7/15/2022 5:53am
Found this bike on in the Boston area. Owner says it runs mint, with low hours for an 08. Also these new parts
-Got brand new graphics
-Renthal Bars
-Bunch of Tusk billet aluminum parts
-New fork seals
-Procircut 304 shorty
-Pretty much new sprockets
-Just replaced all steering bearings
-Warp 9 pegs
He has the price at 3600, talked him down 200 from 3800. Is this a good price?
-Got brand new graphics
-Renthal Bars
-Bunch of Tusk billet aluminum parts
-New fork seals
-Procircut 304 shorty
-Pretty much new sprockets
-Just replaced all steering bearings
-Warp 9 pegs
He has the price at 3600, talked him down 200 from 3800. Is this a good price?
1. took pictures with bike still wet
2. Carb hoses routed incorrectly, plus what looks like vinyl fuel hose
3.tusk billet parts
Might be nice bike but its unlikely. I know Im not explaining all this stuff adequately, but Ive been doing this for a long time and those 3 things immediately turn me off.
Idk if there are any barn finds like this left but when I bought my 125 it had a trashed set of plastics and the seller seemed like a kid, but I could tell from shitty photos that the stock wheels and swingarm were still shiny. I went out there and sure enough someones dad bought the bike brand new, crashed it and lost interest, also went up like 4 sizes on the pilot jet so it ran like shit. Once I confirmed the stock wheels were indeed in perfect shape, I paid the kid on the spot. Was like a brand new bike after a fresh top end and good jetting. Ive put 50 hours on the crank and its still going strong, replaced main bearings for peace of mind.
What Im getting at is use your
Post a reply to: 2008 yz125