2007 YZ 125 front fork problem

Jayce_276
Profile picture for user Jayce_276
Posts
13
Joined
3/3/2022
Location
Quinlan, TX US
Jayce_276
Edited Date/Time 9/5/2022 12:14pm
So I had bought new fork sliders for the outer fork tubes and as I was putting them on I realized that my left fork inner tube was lower than the right after I took the wheel of. Obviously I knew that something was wrong so I tore into it and found this…

And the fork cylinder comp part # 1C3-23170-R0-00 I can’t find anywhere without it being ordered and having to wait 7-10 days for it to ship. Which isn’t very ideal because I’ve got a race in two weeks! I can’t find one on eBay either. The clicker adjuster I can find but that’s it. Any help or encouraging words would be nice. Thanks
|
Jayce_276
Profile picture for user Jayce_276
Posts
13
Joined
3/3/2022
Location
Quinlan, TX US
Jayce_276 9/3/2022 8:42am
9/3/2022 8:42am
Update 1: I was able to pull the dampener rod out of the cartridge body trying to figure out what to do next…
Factor E
Profile picture for user Factor E
Posts
734
Joined
9/22/2011
Location
So Cal, CA US
Factor E 9/3/2022 9:11am
9/3/2022 9:11am
Call suspension shops and ask for a used one
Most should have spares
1
Mr. Robinson 9/4/2022 11:44am
9/4/2022 11:44am
Jayce_276 wrote:
Update 1: I was able to pull the dampener rod out of the cartridge body trying to figure out what to do next… [img]https://p.vitalmx.com/photos/forums/2022/09/03/566863/s1200_B03F46F8_B9E7_4A00_9768_A363D47FB895.jpg[/img]
Update 1: I was able to pull the dampener rod out of the cartridge body trying to figure out what to do next…
My buddy has a set of '07 cartridges. Send me a PM if you are interested and I'll see what he wants for them.

The Shop

See All »
Factor E
Profile picture for user Factor E
Posts
734
Joined
9/22/2011
Location
So Cal, CA US
Factor E 9/5/2022 11:59am
9/5/2022 11:59am
Make sure you get the true length rod by taking off the shim post and measuring just rod

Post a reply to: 2007 YZ 125 front fork problem