Posts
5
Joined
9/10/2017
Location
Coal City, IL
US
etlion44
9/10/2017 10:37pm
9/10/2017 10:37pm
Howdy all,
Just picked up a fried 08 KX250F. Lower end is good I'm told, head is torched, as well as piston. Cylinder is also pretty scored up. So complete Top end is the plan, my question is this. A friend has a an 06 RM-Z Cylinder with a JE Big Bore 80mm piston, is this compatible with my KX? Also, I'm looking for a head for the bike, but moreso on a budget build. Should I stick with finding an 08, or will anything between 04-08 Kawi/04-06 Suzuki suffice? Any insight is greatly appreciated.
Thanks
ET
Just picked up a fried 08 KX250F. Lower end is good I'm told, head is torched, as well as piston. Cylinder is also pretty scored up. So complete Top end is the plan, my question is this. A friend has a an 06 RM-Z Cylinder with a JE Big Bore 80mm piston, is this compatible with my KX? Also, I'm looking for a head for the bike, but moreso on a budget build. Should I stick with finding an 08, or will anything between 04-08 Kawi/04-06 Suzuki suffice? Any insight is greatly appreciated.
Thanks
ET
Paw Paw
http://www.cylinder-works.com/ProductSearch.aspx?page=1
RMZ 250 & KX250F were the same from 04- 06, but not after that.
Paw Paw
Paw Paw
The Shop
I had a few of those bikes back in the day both of them with the cylinder works big bores.
I don't remember there being a difference in the cylinders then. Although, I have slept since then so who knows.
One of the things I do remember being different was the water pump.
Post a reply to: 2006 RMZ250 Big Bore kit on a 2008 KX250F?