2006 RM 250 Steering Stem

b8res
Profile picture for user b8res
Posts
511
Joined
1/30/2014
Location
Lodi, CA US
b8res
Edited Date/Time 12/6/2017 9:55pm
Anyone have an outlet for steering stem. I picked up a new set of RG3 3X clamps and would like to get new stem pressed in. OEM parts fiche doesn't list that item separate. I'd rather keep my OEM clamps as working set if possible.

Any leads would be great.

Thanks
|
beamer
Profile picture for user beamer
Posts
783
Joined
8/16/2006
Location
Squaw River CA
beamer 12/4/2017 5:41pm
12/4/2017 5:41pm
There was a similar thread about this not long ago, for a rm250 as well. It got me thinking since that’s the bike I own as well, I looked on partszilla and it shows it available. It is however quite expensive new, like $400 is my memory serves correct
b8res
Profile picture for user b8res
Posts
511
Joined
1/30/2014
Location
Lodi, CA US
b8res 12/4/2017 6:51pm
12/4/2017 6:51pm
beamer wrote:
There was a similar thread about this not long ago, for a rm250 as well. It got me thinking since that’s the bike I own as...
There was a similar thread about this not long ago, for a rm250 as well. It got me thinking since that’s the bike I own as well, I looked on partszilla and it shows it available. It is however quite expensive new, like $400 is my memory serves correct
I looked at Partzilla & RMATVMC, stem and bottom clamp sold as one.

I’m looking for the stem separately.

Thanks for the reply!
KDXGarage
Profile picture for user KDXGarage
Posts
2562
Joined
12/16/2010
Location
AL US
KDXGarage 12/4/2017 11:52pm
12/4/2017 11:52pm
Emig Racing used to sell stems. You might check there.

The Shop

See All »
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 12/6/2017 12:53pm
12/6/2017 12:53pm
b8res wrote:
Anyone have an outlet for steering stem. I picked up a new set of RG3 3X clamps and would like to get new stem pressed in...
Anyone have an outlet for steering stem. I picked up a new set of RG3 3X clamps and would like to get new stem pressed in. OEM parts fiche doesn't list that item separate. I'd rather keep my OEM clamps as working set if possible.

Any leads would be great.

Thanks
I've got one for sale
b8res
Profile picture for user b8res
Posts
511
Joined
1/30/2014
Location
Lodi, CA US
b8res 12/6/2017 1:08pm
12/6/2017 1:08pm
Bruce372 wrote:
I've got one for sale
Bruce...where you located, and how much? Any pictures would be great.

Thanks

Post a reply to: 2006 RM 250 Steering Stem