2005 YZ handle bar set up

11/14/2017 2:17pm Edited Date/Time 11/24/2017 8:06am
Looking for some help here. Got a YZ 250 2005 model. Now it came with handle bar risers and pro taper fat bars on it when I bought it. I felt they where too high for me so tried to change it back to standard so bought some upper bar clamps to fit onto the top clamp. I don't trust these ones so looking for some input.

I have the chance on a set of renthal top clamps without the mounts,(see picture) are these worth giving a go and buying the mounts to go with it?

or does some one recommend a way to get the top
clamps to fit twin walls? Kinda stuck on this one so looking to the vital gods to help me out.

Any info on set up would be greatly appreciated.


Thanks legends



|
11/14/2017 4:22pm
There are setups to switch to newer Yamaha triple clamps and front end, not sure if you need axle spacers since the 05 has forks 1mm closer than years after.
11/21/2017 2:45pm
Ok so best to get an aftermarket 2006 triple clamp set? And possibly wheel spacers? I just wasn't sure if the forks where different sizes as I know they made changes to them in 2006
11/24/2017 8:06am
Hawicky414 wrote:
Ok so best to get an aftermarket 2006 triple clamp set? And possibly wheel spacers? I just wasn't sure if the forks where different sizes as...
Ok so best to get an aftermarket 2006 triple clamp set? And possibly wheel spacers? I just wasn't sure if the forks where different sizes as I know they made changes to them in 2006
Forks are the same sizes, any Yami clamps from 06+ should work.

Post a reply to: 2005 YZ handle bar set up

The Latest