2003 cr250 fork guard

Keith72
Posts
389
Joined
7/17/2010
Location
Omaha, NE US
8/26/2017 8:37am
Did the bolt pattern for the brake line clamp change from 2003 to 2004 and newer? Got a ride engineering brake line clamp for my new galfer front brake line and the holes dont line up. Motosport said its should fit but package says for 2004 and up. Do I need to purchase a newer fork guard?

Thanks
|
Keith72
Posts
389
Joined
7/17/2010
Location
Omaha, NE US
8/26/2017 6:58pm
Ok. Probably sending the ride engineering clamp back. Who makes a brake clamp that would work for a Galfer front brake line on an 03 cr250? Stock clamp is too big.
FahQ
Posts
676
Joined
7/5/2015
Location
NJ US
8/27/2017 6:33am
Maybe the 04- fork guards could be the easier fix
Keith72
Posts
389
Joined
7/17/2010
Location
Omaha, NE US
8/27/2017 9:29am
FahQ wrote:
Maybe the 04- fork guards could be the easier fix
I looked into that. Some of the part numbers were the same from year to year and some were different. Think I need to go look at some bikes and measure to see if there is a difference. Thanks.

Post a reply to: 2003 cr250 fork guard

The Latest