Posts
12
Joined
9/10/2015
Location
Rockford, TN
US
Has anyone upgraded brakes on to 2017 CRF450R brakes? I changes the front caliper over to the 03 bracket and it mounted just fine. Pads seem to sit really close to the rotor but are even.
The rear brakes are 2013 CRF250R. They worked great on previous bike. They sat on the shelf for 8 mths during the build and now act as if they have air in them. Pads are new and caliper slides freely. No leaks, no air in system, system was sealed the whole time. Caliper piston moves about 1/8th inch when pedal is pressed all the way down. At a loss. Has anyone experienced this problem?
The rear brakes are 2013 CRF250R. They worked great on previous bike. They sat on the shelf for 8 mths during the build and now act as if they have air in them. Pads are new and caliper slides freely. No leaks, no air in system, system was sealed the whole time. Caliper piston moves about 1/8th inch when pedal is pressed all the way down. At a loss. Has anyone experienced this problem?
Post a reply to: 2003 CR125 Brakes