2002 cr125 waterpump wistle fixed but back to leaking

Related:
Create New Tag

2/22/2018 5:38 AM

I rebuilt my waterpump recently with all new gaskets, seals, and a bearings and now my water pump whistles, but it not does leak coolant at all but it does wistle pretty loud. Any help is appreciated.

|

2/22/2018 8:18 AM

How’s the bike run? Whole different machine, but on cars, when the water pump whistles it’s usually because the seals are bad.

|

If you're not mixing gas, you're not haulin ass.

2/22/2018 9:02 AM

Id guess you put a seal in backwards or didnt put grease on them. Also how is air getting in to whistle in the first place?

|

2/22/2018 11:52 AM
Edited Date/Time: 2/22/2018 11:53 AM

Did you forget the washer that goes in-between the impeller and the shaft. (cr250 has this not 100% the 125 does)

|

2/23/2018 2:05 PM

Either sucking air or impeller rubbing housing.

Paw Paw

|

2/23/2018 4:48 PM

Watching to many andy griffith reruns?

|

3/12/2018 6:16 AM

the wistle is now fixed and the only think left to replace is the shaft. can that alone cause a leak?

|

3/12/2018 6:35 AM

bh wrote:

the wistle is now fixed and the only think left to replace is the shaft. can that alone cause a leak?

Yea if the shaft is damaged then it wont seal correctly.

|