2000 yz125 clutch help

JoshC22
Profile picture for user JoshC22
Posts
3
Joined
5/19/2019
Location
Nashua, NH US
JoshC22
So i have recently started a new project which is a 2000 yz125 i got everything going and working sound then the clutch stopped working. When i took it apart i realized that the clutch hub and basket both had grooves in them so i replaced those. My clutch plates are all still good. But when i put it back together the clutch still doesn’t disengage i dont understand and its starting to frustrate me. Can anyone help??? Please.
|
Paw Paw 271
Profile picture for user Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
Paw Paw 271 5/19/2019 3:29pm
5/19/2019 3:29pm
Check your clutch arm pivot cam. If worn, or the bearing is bad, it will not give enough movement to disengage.
Also make sure you have the cable adjusted correctly.

Paw Paw
JoshC22
Profile picture for user JoshC22
Posts
3
Joined
5/19/2019
Location
Nashua, NH US
JoshC22 5/19/2019 6:57pm
5/19/2019 6:57pm
Paw Paw 271 wrote:
Check your clutch arm pivot cam. If worn, or the bearing is bad, it will not give enough movement to disengage. Also make sure you have...
Check your clutch arm pivot cam. If worn, or the bearing is bad, it will not give enough movement to disengage.
Also make sure you have the cable adjusted correctly.

Paw Paw
My cables are all good. Ill take a look at it thank your for the help. Im also gonna take the plates out again and soak them for another 24hr.

Post a reply to: 2000 yz125 clutch help