After the usual simple bolt on mods, pipe and v force, what would be the next best upgrade got get some more bottom to mid? The top end has plenty, I’ve just ridden a few bikes which get to that power quicker/ easier. Thanks in advance
Mill the head for more compression and run race gas. You'll notice a bump in throttle response and a little ooomph down low, at the cost of some overrev.
Thanks for the answers, will trying porting, sprocket 1 tooth higher at the back and look to see if I can get a boyesen power wing or similar, can I run race gas on a fairly standard engine? If so which is best? Thanks again
Race gas might help a little, but really your engine will only use however much octane it needs and spit out the rest. It's quite expensive to run that kind of fuel if you don't need it for octane. Oxygenated fuels can certainly help, however.
The Shop
Porting gains for mid-top and race fuel is where I am looking to go on my 150sx.
on the 2011-2015 125/150 Engine you can make
13-16% more Power.
But the 2016+ Models are so good in Stock Form that he can make max. 5% more power with the Full Tuning Program.
So i leave the Bike as it is (SXS Pipe and Vforce 4)
and spend the Money in Suspension Tuning
Has anyone really ever felt all that much of a gain from an exhaust? I always wind up replacing mine but it's always pretty blah in terms of gains.
Race gas.....biggest gain for the money
Yes, you can run race gas in any engine.
Post a reply to: 2 stroke mods