Posts
40
Joined
2/4/2015
Location
Apex, NC
US
Edited Date/Time
2/22/2018 7:29pm
Gentlemen,
The bike shop that I usually get mc1 at stopped carrying it so I had to get some castor927 high performance 2 cycle oil. It's a 16oz bottle. My question is how much gas should I add to the 16oz bottle? I usually put one 16oz bottle of mc1 to 4.8 gallons and it worked fine. I am aiming at using the fuel for a 96 yz 250, 03 rm65 and an 86 yz80. Any suggestions that can work with all three? Now these ain't fire breathers, just weekend warriors that want to protect the engine but not foul plugs or smoke me and the kids out. Thanks to all.
Matt
The bike shop that I usually get mc1 at stopped carrying it so I had to get some castor927 high performance 2 cycle oil. It's a 16oz bottle. My question is how much gas should I add to the 16oz bottle? I usually put one 16oz bottle of mc1 to 4.8 gallons and it worked fine. I am aiming at using the fuel for a 96 yz 250, 03 rm65 and an 86 yz80. Any suggestions that can work with all three? Now these ain't fire breathers, just weekend warriors that want to protect the engine but not foul plugs or smoke me and the kids out. Thanks to all.
Matt
( Right now you are running about 43:1)
Also be sure to dump all your old fuel mix as it will not mix well with the new stuff.
Paw Paw
Matt
12oz oil and 4.8 gal gas = 51.2 to 1 ratio.
to keep the same ratio...... 16oz oil and 6.4gal gas = 51.2 to 1 ratio.
Or you could just use 12oz out of the bottle and have 4 oz left over.....
The Shop
Bottle says with race fuel but I had it happen with pump gas also.
Post a reply to: 2 stroke mix