1999 KTM 380 Kick Start Assembly

Related:
Create New Tag

2/24/2018 6:00 PM

Hi, I’m having an issue installing the kick start assembly. I get to the point of installing the kick start spring and attempt to attach it to the spring hanger and this is where I get frustrated. The shaft keeps spinning and when I think it’s right the mechanism engages when the kickstart lever is already half way down? I understand my attempt at explaining this was probably butchered but any help would suffice thanks!!

|

2/24/2018 7:21 PM

It sounds like you are attempting to put the spring pressure backwards ( or twisting it the wrong way).

Paw Paw

|

2/25/2018 7:51 AM

I spin it clockwise.

|

2/25/2018 10:20 AM

That should be correct.

Paw Paw

|

2/26/2018 2:45 PM

I figured out the kick start setup but now when I put the case cover on it won’t move. With the case cover is off it kicks over perfectly?

|